<home>

Able Dense Castable Products

Information about castable installation

Bagger

ABLE Tab Cast 96

A very high purity, high alumina castable manufactured from selected grains of fused alumina and pure calcium aluminate cement. It has a very low iron content making it resistant to carbon disintegration and reducing atmospheres. The maximum use limit is 34000F.

ABLE Tab Cast 3400

A fused alumina castable possessing extremely high refractoriness, exceptional strength and volume stability, excellent resistance to erosion and abrasion. This product is ideal for use in regenerator slide values and "Y" sections of Fluid Catalytic Crackers. The maximum use limit is 34000F

ABLE Tab Cast Coarse 

A high purity castable manufactured from a blend of coarse fused alumina and pure calcium aluminate cement. Able Tab Cast Coarse has properties similar to Able Tab Cast 96 with increased working time and coarse grains of fused alumina. The maximum use limit is 34000F.

Able Cast 3300

An 80% plus alumina castable designed for areas where resistance to abrasion and hot load strengths are desired. Able Cast 3300 has excellent resistance to slag and molten metal. The maximum use limit is 33000F.

Able Cast 3200

A 70% alumina castable containing a blend of high alumina grogs and high alumina hydraulic binders. It was designed for quick cast, cure, and firing (when properly placed and cured) thus eliminating excessive delays in preheating schedules. Able Cast 3200 has good volume stability and exceptional strengths at intermediate temperatures. The maximum use limit is 32000F.

Able Cast 3100

A high alumina castable with an alumina content of 65%. This mix is designed with good volume stability and a minimum of shrinkage at high temperatures. This product is ideal for use in steel plant applications requiring a high alumina product to meet severe operating conditions at elevated temperature. The maximum use limit is 31000F.

Able Cast 3000 - Data Sheet pdf

A low iron, high purity, 60% alumina castable. It is designed to successfully withstand high sulphur fuel, reducing atmospheres, carbon deposition, erosion and abrasion. Able Cast 3000 can be used for casting or troweling. The maximum use limit is 30000F.

Able Gun 3000

A low iron, high purity, 60% alumina gunning refractory. It is designed to successfully withstand high sulphur fuel, reducing atmospheres, carbon deposition, erosion and abrasion. Able Gun 3000 has a very low rebound loss. The maximum use limit is 30000F.

Able Ladle Cast HS

Specifically designed for casting of ladles. It develops a fast set (range: 30-45 minutes) making lining replacement expedient. Able Ladle Cast HS develops high strengths which withstands shock and chipping. The maximum use limit is 30000F.

Able Cast BF

A 28000F castable used extensively for blast furnace repair. The material has been designed to give a low iron content to resist the effects of CO disintegration. It possesses excellent strength to resist abrasion. Able Cast BF is also useful in repairing tread-wells, open top iron ladles, hot metal mixers and other similar applications. The maximum use limit is 28000F.

Able Cast 2800

A specially formulated refractory castable for use in applications where destructive gases and atmospheres or excessive wear affects refractory life. It produces a tough monolithic structure with negligible shrinkage. Able Cast 2800 can either be poured or rammed by controlling the water content during mixing. It is also available as a gunning mix. The maximum use limit is 28000F.

Able Gun 2800

A specially formulated refractory gunning castable for use in applications where destructive gases and atmospheres or excessive wear affects refractory life. It produces a tough monolithic structure with negligible shrinkage. The maximum use limit is 28000F.

Able Cast 2800 LI

A specially formulated refractory castable for use in applications where destructive gases or atmospheres or excessive wear affects refractory life. A special binder is used in Able Cast 2800 LI to increase its effectiveness under the disintegrating action of carbon monoxide. Able Cast 2800 LI can either be poured or rammed by controlling the water content during mixing. The maximum use limit is 28000F.

Able Cast 2700 LI

A specially formulated low iron, high duty refractory castable designed to withstand loads exceptionally well and resist normal abrasion and erosion at moderate temperatures. This material is ideal for use in Seal Tanks of Fluid Catalytic Crackers. The maximum use limit is 27000E

Able Cast 2600

A general purpose refractory castable. It has been specifically formulated to resist erosion and abrasion at moderate temperatures. Able Cast 2600 is also available as a gunning mix. The maximum use limit is 26000F.

Able Gun 2600

A general purpose refractory gunning castable. When gunned it produces a tough monolithic structure with negligible shrinkage. The maximum use limit is 26000F.

Able Cast 2600 C

A coarse aggregate mix utilized for pouring extremely large sections. It is a high strength mix through the lower temperature ranges and possesses good resistance to thermal shock. The maximum use limit is 26000F.

Able Cast 2800 C

Similar in aggregate composition to Able Cast 2600 C and is used mainly for pouring extremely large sections. It has an improved binder which extends its use limit to 28000F. Able Cast 2800 C is "unaffected" after 100 hours testing under the disintegrating action of carbon monoxide. The maximum use limit is 28000F.

Able Cast ABR

A high strength, extremely abrasive resistant castable which can be placed by either casting, gunning or troweling. This material is ideal for use in flue gas lines and stand pipes of Fluid Catalytic Crackers. The maximum use limit is 27000E

Able Cast

A fireclay castable with excellent strength and resistance to abrasion in the low to moderate temperature range (10000F -13000F). Very easy to mix and cast. The maximum use limit is 22000F.